PRICING
SHIPPING
Standard Shipping: 3 – 7 Business Days
All shipping times are estimated and may not be 100% accurate. Shipping times may vary based on location and order size. Most orders are shipped within the next business day.
Healthier Homes start with SUPERSEAL.
Helps to control moisture from entering into soft surfaces, such as couches, carpet, laminated wood, etc. By installing SUPERSEAL the membrane can help to control moisture from within concrete floors and walls from getting into the living space. It can be used as a subfloor under new floor finishes, and it can be used as a wall barrier for leaking or damp walls. Along with a ventilating system SUPERSEAL can provide a much dryer basement.
How to save money by using SUPERSEAL membrane to make your basement dry
You have a basement with exterior walls that are damp or leaking. Your choices are:
Option #1 install: SUPERSEAL membrane on the inside of the foundation connected to a French drain, eliminating the water from getting into the basement. This may be the most cost effective way with the least amount of labour.
Option #2: Remove you landscaping and sidewalks, and dig out the exterior of your foundation. Install a new drain system and SUPERSEAL membrane, and then replace the landscaping and sidewalks.
Dimpled Foundation Membrane Interior French Drain Application
Pick a roll size that goes from the exterior grade height down the wall to the French drain system. Example: Let’s say the wall is 7 feet to grade height and you need another foot to make it into the French drain. The roll size would be 7 feet 11 inches. Allow for bends and curves to ensure you have enough membrane.
Install the membrane to the grade height marked on the wall and fasten every 5 feet with a SuperPlug 4 inches from the top. Then fasten the membrane in the middle and at the bottom. Use a tar base or caulk to seal around the nail head.
Ensure the end of the membrane goes into the French drain stone and that the drain goes to a sump pump or to day light by gravity.
Finish the membrane by installing an end cap and top cap. If you can fasten the membrane to the framing plate you will not need a top cap. The purpose of installing the membrane from the grade height to the French drain and capping the edges is to ensure that the entire wet surface is enclosed within the membrane. This helps eliminate the surface moisture from getting into the moving air within the basement, which will then absorb into soft surfaces, such as couches and carpets.
SuperPlugs– Fastens the membrane to the wall
Membrane Cap molding (optional) to cap the sides or the top if required
Specifications
| PART # | IMPERIAL | METRIC | ||||
| SM36107 | 3’6″ X 65’6″ | 230ft² | 29 lbs | 1.07m x 20m | 21.4m² | 13kg |
| SM50150 | 5’0″ X 65’6″ | 325ft² | 40 lbs | 1.5m x 20m | 30m² | 18kg |
| SM60183 | 6’0″ X 65’6″ | 393ft² | 49 lbs | 1.83m x 20m | 36.6m² | 22kg |
| SM67200 | 6’7″ X 65’6″ | 431ft² | 53 lbs | 2.0m x 20m | 40m² | 24kg |
| SM74224 | 7’4″ X 65’6″ | 480ft² | 59 lbs | 2.24m x 20m | 44.8m² | 27kg |
| SM80240 | 7’11” X 65’6″ | 518ft² | 64 lbs | 2.4m x 20m | 48m² | 29kg |
| SM81127 | 8’11” X 65’6″ | 583ft² | 72 lbs | 2.7m x 20m | 54m² | 33kg |
| SM91130 | 9’11” X 65’6″ | 648ft² | 80 lbs | 3.0m x 20m | 60m² | 36kg |
| 11’6 & 13’2 ROLLS ARE ONLY AVAILABLE AS A SPECIAL ORDER ITEM | ||||||
| SM11635 | 11’6″ X 65’6″ | 754ft² | 93 lbs | 3.5m x 20m | 70m² | 43kg |
| SM13204 | 13’2″ X 65’6″ | 861ft² | 107 lbs | 4.0m x 20m | 80m² | 47kg |
Tested and Passes The FollowingICC ESR-3107, CCMC# 13098-R, CCMC# 13099-R, CGSB, NBC 9.13.3, 9.14.2.1 & IRC R405, R406 |
|
|
Dimpled Sheet
|
High Density Polyethylene (HDPE)
|
|
Available Colors
|
Black (Standard), Brown (Special order)
|
|
Compressive Strength
|
5200 psf (250 kN/m² )
|
|
Dimple Height
|
5/16″ (8mm)
|
|
Fire Rating
|
B2 (DIN 4102)
|
How do I use SUPERSEAL membrane to control the water and moisture that is leaking through my foundation wall?
You can use SUPERSEAL to manage the water that comes into your home from a cracked foundation. You install it and connect the bottom of it into a French drain system.
I have a rising water table in my basement, how do I control the water using SUPERSEAL?
Install the membrane with the dimples down and pour a new concrete floor over the membrane. The space created between the dimples and old floor will allow the water to be directed to the drain system. Ensure the drainage system is located in areas were the water needs to be removed from.