ROLLER GRADE WATERPROOFING

1 1

SUPERSEAL Roller Grade Waterproofing is an easy to use waterproof membrane that can be easily rolled onto a foundation wall. 

  • 5 Gallons / 18.9 Litres
    - 36 pails per pallet
    - Apply with a brush or roller
    - Can be used to patch tie holes, rock pockets, seams, or small waterproofing jobs

Quantity may vary based on application. One 5g pail can cover approximately;

  • 150ft² at 40 mils thick (30ft² per gallon)
  • 100ft² at 60 mils thick (20ft² per gallon)

 

Areas of Use

All types of walls, click for more information.

  • Poured Concrete Walls
  • Concrete Block
  • ICF, Insulated Concrete Form

Benefits

  • Highly elastic rubberized membrane that bridges cracks with ease.
  • Water-based, No-VOC’s, environmentally friendly

Dimpled Drainage Membranes

SUPERSEAL Dimpled Membrane, Double Drain, and Super Drain provide additional protection and drainage for your home. They can also increase your warranty and give you peace of mind. You can rest easy knowing that SUPERSEAL has your back.

View full details

Typical Foundation Installation

Tools Required

  • Tape Measure
  • Roller / Brush
  • Protective equipment

Calculating Material Coverage

Numbers are approximate based on application.

1 5g pail can cover approximately;

  • 150ft² at 40 mils thick (30ft² per gallon)
  • 100ft² at 60 mils thick (20ft² per gallon)
  • Quantity can vary based on application.

Preparing the Foundation

  • Clean the footing and wall of loose debris or standing water
  • Mark the grade height of the areas to be waterproofed.
  • Patch all tie holes, pour lines, or honeycombing with SUPERSEAL Mastic.

Installation

Using ½" (15mm) roller;

  • Apply a thick first coat to all areas to be protected.
  • Allow coating to dry to the touch

  • Apply a 2nd or 3rd coat to achieve the desired thickness
  • Allow to cure for 24 hours

Install a Drainage Membrane or Protection board if required

View Cart

PRODUCT SPECIFICATIONS & APPROVALS

Specifications

MSDS Waterproofing

40 mil Waterproofing Spec Sheet

Approvals

USA - CCRR 0485

CANADA - CCMC 13452-R